Bang & Olufsen BeoSound 3000 - User Guide - Manual (Page 5)

5
Buttons on the operation panel
All the buttons are located in one place. They
are conveniently grouped according to type of
function, so you can easily find your way
around the panel while operating the system.
Displays
The displays tell you what the system is doing.
The cues in the upper display relate to functions in
the CD player, e.g. track number.
The lower display shows the name of the current
radio station, or it tells you which CD is playing, if
you have named it.
Secondary functions
This group of buttons gives access to all the
secondary functions used e.g. for tuning in radio
stations or programming, see page 12 in the
Reference book for further instructions.
Number buttons
The number buttons enable you to
select other program numbers, or
select tracks on a CD.
REPEAT REPLAY 1 6 LOAD CD
RANDOM EDIT SCAN 2 7
A
>>>
B
PLAY
TUNE STORE DELETE 3 8
DISPLAY CLOCK
AUX
NAME
STOP
9 RADIO CD-ALL
ON/OFF SOUND
4
5 0 TIMER MUTE
TRACK 1 2 3 4 5 6 7 8 9 10
RANDOM
Primary functions
The buttons on the right-hand side of the panel
gives you access to all primary functions;
switching the system on and off, adjusting
volume and operating the radio and CD player.
NOTE! If PIN appears in the display the first time
you activate a function, and you have not received
a PIN code from your Bang & Olufsen retailer,
contact your retailer to receive a PIN code. For
further information about the PIN code function,
refer to the chapter ‘Set and enter a PIN code’ on
page 26 in the Reference book.