Bang & Olufsen BeoSound 1 - User Guide - Manual (Page 9)

Adjust volume
You can turn the volume up and down at
any time. If you store a volume level, the
BeoSound 1 starts at this level next time it is
switched on. The maximum volume level is 72,
but the maximum level that can be stored is 60.
Reading the display
The luminous display will keep you informed
of the source you have chosen, and what the
system is doing.
Press to turn the volume
down
Press to turn the volume up
The volume level is shown in the
display
Press STORE twice to store
the volume level shown in the
display
Press both and
simultaneously to mute the
speakers.
Press one of the buttons to
recall the sound
Pr13 indicates the present radio
program
88.9 indicates the radio
frequency
Cd 1 indicates that track
number one on the CD is
playing
Cd-- indicates that the CD is
paused
2.33 indicates the time when
searching through a CD
32 indicates the volume
– – indicates that the speakers
are muted
45 indicates the number of
minutes for a Stop Timer
20.15 indicates the time
AU indicates that a the AUX
socket is activated
Pin indicates the PIN code
system
BeoSound 1 is in standby
Changing the display
Change the display mode or light, three
different light settings are available.
BeoSound 1 remembers ypur mode or light
setting until you change it again.
Change the display mode…
Press and at the same time to
change from program number
to frequency
To change back to program
number, pres and again at
the same time
Change the display light…
Keep the STORE button pressed
down
Press to dim the display light
and press to brighten the
display light
9
VOLUME
32
STORE
VOLUME
Pr13
88.9
Cd 1
Cd--
2.33
32
– –
45
20.15
AU
Pin
•
RADIO
RADIO
STORE
VOLUME