Bang & Olufsen BeoLab 2000 - User Guide - Manual (Page 11)

11
Note: The BeoLab 2000 always returns to the
preset volume level when you switch it to stand-
by, but you can also make it return to the preset
level by pressing the Beo4 LIST button to display
RESET
*, then press GO.
*Note: In order to display A.SETUP on Beo4 and
S.STORE
which will then appear automatically,
you must add the function to the Beo4 list of
functions. You must also add RESET to the Beo4
list of functions. Please refer to Beo4’s own User’s
guide and the chapter, Customising your Beo4, for
further instruction.
Adjust the volume level to your
liking
Press until A.SETUP* is displayed
Press to be able to store
Press until S.STORE* is displayed
Press to store the current setting
Presetting the volume level
When you have adjusted the volume
level in the BeoLab 2000 speakers, the
Beo4 remote control enables you to
preset the level in the BeoLab 2000 so
that it always switches on at that level.
All you have to do, to turn your
adjustment into a permanent setting, is
find the cues A.SETUP* and then
S.STORE* in the Beo4 display and press
GO.
or
LIST
GO
then
LIST
GO
then