ATIK Cameras 11000 User Manual - Manual (Page 6)

3.2 Sensor
The sensors used in the Atik 4000/11000 cameras are listed below:
Black and White Color
Atik 4000 Kodak KAI-4022 Kodak KAI-4022C
Atik 11000 Kodak KAI-11002 Kodak KAI-11002C
The optical window used in front of the CCD is a BK7 with BBAR coatings on
both sides ensuring that no reflection will appear in your image.
3.3 Analog to Digital Converter (ADC)
The Analog to Digital Converter (ADC) is a 16-bit ADC. This means that your
Atik camera will allow you to record subtle levels of gray, providing you with
enhanced dynamic range when capturing an image.
3.4 Power Consumption
Your Atik camera was designed to have low power consumption: please see
the table in section 4 for details specific to your camera model. The 2.1mm
centre-positive DC input is compatible with a wide range of 12V DC supplies.
WARNING: The mains power adaptor supplied with the camera is for indoor or
observatory use only. There is a risk of electric shock if the adaptor is used in
damp environments or outside. If in doubt do not use the adaptor and consult a
trained electrician.
3.5 USB Port
The Atik 4000/11000 cameras use a USB 2.0 high-speed interface to
minimize image download times. A higher speed “preview” mode is also
available, providing roughly twice the speed of the normal mode.