Antelope Audio Zodiac DAC - Manual (Page 10)

When the display shows an input source, pressing this button once will switch to the next available
input source.
NOTE: Only inputs fed with valid signals appear as options. Example: If only signals on AES and
TOSLINK1 inputs are present, they will be the only options available when selecting the
source (together with analog input 2).
Hint: When the display shows the sample rate, you should push this button twice in order to switch
to the next available source input.
8. Headphone Outputs
Universal Stereo Headphone jacks for connecting headphones for a wide range of impedances.
6. Rear Panel Explained
9. DC Power Connection
For use with Antelope’s DC power supply only.
10. Balanced Analog Outputs
Balanced XLR outputs for professional use.
Pin layout:
Pin 1 – Ground
Pin 2 – Hot
Pin 3 - Cold
The default setting is +22dBu.
11. Unbalanced Analog Outputs
Analog Outputs (-10dBv) using RCA type connectors.
1
10