AJA RD10MD2 - Manual (Page 6)

6
DIP Switch
Settings There is a separate 6-position dipswitch for each channel that controls a number of
configuration settings for the RD10MD2 card. The top dipswitch controls channel 1
and the one beneath it, channel 2. Settings are the same for both dipswitches. These
are described in the following table.
Switch Number Description Details
1 Pedestal UP = Pedestal Off
DOWN = Pedestal On
2 Crop UP = Crop On—the Horizontal Edges are
cropped off from the input lines; all output lines
are used
DOWN = Crop Off—black bars are on top and
bottom; all of the input line is visible horizontally
3 Monitor UP = 4:3 monitor
DOWN = 16:9 monitor
4 Focus UP = Off, not in focus mode
DOWN = On, in focus mode: passes the middle
720 pixels and 486 lines without filtering
5 Graticule UP= Graticule Off
DOWN = Display Graticule showing safe area
for 4:3 material on the 16:9 raster
6 AUX Unused