AJA 4K2HD - Manual (Page 9)

4K2HD v1.7 www.aja.com 9
Installation
Typically, 4K2HD installation consists of the following steps:
1. Ensure the 4K2HD is disconnected from power.
2. Connect video equipment to the converter BNCs and HDMI connector.
3. Apply power to the converter (AJA power supply included).
4. The 4K2HD will now run using the default factory settings. If you wish to alter the
factory settings, you’ll need to:
• Install the AJA MiniConfig software on your computer.
• Attach the 4K2HD via USB.
• Make your changes using MiniConfig setup screens.
This process is detailed in “USB Control and Setup—Using AJA MiniConfig” on page 10 .