BT 3200 - Manual (Page 35)

35 Base settings
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]
4. Press or to display either Tone or Pulse and press
. You hear a confirmation tone and Stored is
displayed.
5. Press and hold to return to standby.
PBX access
PBX access can be set to any number between 0 and 9.
If the first number you dial is the same as the PBX access
code a 2.5 second pause will be inserted prior to the rest
of the number being dialled.
1. Press to open the main menu.
2. Press or until the display shows Setup base and
press .
3. Press or until the display shows PBX Access and
press to select.
4. Number is displayed. Enter the access code you want and
press . You hear a confirmation tone and Stored is
displayed.
5. Press and hold to return to standby.