BenQ AWL-700 - Manual (Page 9)

BENQ Corporation
5
Back panel of the Wireless LAN Router:
Back Panel Description
Reset button
Designed to reset the AWL700 after a system failure or crash.
When pressed, the AWL700 will reset.
PWR/DC jack
Where power is input to AWL700 through the power adapter
supplied with it. Please do not plug other power adapters into
this jack.
WAN port
Where the AWL700 can be connected to ADSL/cable
modem/Ethernet LAN via an RJ-45 cable.
LAN1/2/3/4 port
Allows the AWL700 to be connected to client devices such as
NIC cards, switches, hubs, and modems with an RJ-45 cable.
Antenna
Where the radio signal carrying network data is transmitted and
received.