Blaupunkt MALIBU C50 - Manual (Page 13)

13
ENGLISH
FRANÇAIS
ESP
AÑOL
PORTUGUÊS
“CAS SCAN” appears in the display. All
the tracks on the cassette are briefly
played in ascending order.
➮
To stop scanning, press the OK
button
;
again.
The current track will then continue to
be played.
Note:
●
You can set the scanning time.
For further details, read the section
on „Setting the scantime“ in the
chapter entitled “Radio mode”.
●
In order for the S-CPS, RPT and
SCAN functions to work properly,
there must be a pause of at least
three seconds between each track
on the cassette.
Changing the display
To switch between the playback direc-
tion and clock displays, press the
(DIS) button
7
once or several times.
Fast tape winding
Fast forward
➮
Press the button
:
.
“FORWARD” appears in the display.
Fast rewind
➮
Press the button
:
.
“REWIND” appears in the display.
Stopping tape winding
➮
Press one of the buttons
:
or
the OK button
;
.
Cassette playback will then be contin-
ued.
Note:
Whilst the tape is fast winding, you can
listen to the radio station that was tuned
into last. To use this feature, you must
first activate “radiomonitor”.
Pausing playback (PAUSE)
➮
To pause cassette playback, press
button 3
>
.
Playback is paused and “CAS PAUSE”
appears in the display.
➮
Press button 3
>
again to
cancel pause.
Switching radiomonitor on/off
➮
Press the MENU button
8
.
➮
Keep pressing the button
:
until “RM ON” or “RM OFF”
appears in the display.
➮
Press the or button
:
to
switch radiomonitor on/off.
➮
When you have finished making
your changes, press the MENU
button
8
or OK
;
.
Skipping blank spaces
(blankskip)
You can automatically skip blank spac-
es on the tape that are longer than five
seconds. To do so, you must first acti-
vate the “blankskip” feature.
Switching blankskip on/off
➮
Press the MENU button
8
.
➮
Keep pressing the button
:
until “BLANKSKIP” appears in the
display.
CASSETTE MODE