BT Freestyle 650 - Manual (Page 50)

Freestyle 650 – Edition 2 – 30.03.06 – 7335
If you experience any problems, please call the Helpline on 0870 605 8047
If you purchase a new handset to use with your BT
Freestyle 650 it will have to be registered to the base.
You will need to do this before you can use it.
If you have purchased a BT Freestyle 650 multiple pack
any additional handsets comes pre-registered to the
base. With 2 or more handsets, you can make internal
calls, page handsets and transfer external calls between
your handsets.
Registering a new handset to your
BT Freestyle 650 base
At the new handset:
1. Follow the new handset’s user guide to set the handset
in registration mode.
At the BT Freestyle 650 base:
1. Press and hold the base button for at least 5
seconds, until you hear the validation tone (two beeps),
then release the button.
Making internal calls
You can make internal calls between two BT Freestyle
650 handsets.
1. Press .
Find
IMPORTANT
You must choose a handset that is
GAP compatible to use with your
BT Freestyle 650.
You can register up to 4 handsets
to one BT Freestyle 650 base.
If the handset does not locate the
base, the handset will return to the
previous menu. Try to register
again by using a different available
base number. Ensure that you are
in close vicinity of the base.
The icon is displayed on both
handsets during an internal call.
EXT
INT
EXT
INT
Using additional handsets
50