Black & Decker BD-VS600 - Manual (Page 2)

® ® ®
Thank you for buying a Black & Decker paper shredder. Black & Decker paper shredders
have become the benchmark for innovation, performance and quality to protect against
identity theft. We have taken great care in designing and engineering a product to meet
and exceed your needs.
To ensure years of safe, efficient performance, please read
these important product usage and safety instructions.
WARNING ICONS: The icons on top of the shredder warn the user of the potential
dangers if the shredder is used improperly.
Operation
HOW TO USE YOUR SHREDDER
1. Place shredder head onto bin. Button on side will pop into place securing the head onto
the bin (fig 2).
2. Slide safety shield to the open position (fig 3).
3. To empty bin, depress release button and remove head. Shreds should be emptied into
separate waste bin. ALWAYS unplug before emptying bin.
To begin shredding, locate the power switch (2) on the unit and select the “Auto” mode.
The green LED light indicates the shredder is “On” and ready to use. Slide the safety shield
(4) to the right until it clicks into place and exposes the paper feed slot.
When the “Bin Full” light (See “Product Information” section) turns on, the bin (7) is full and
the shredder will not operate. Press the release button (5) on the right hand side of the
shredder, and lift the shredder off of the bin. Empty the bin before reattaching the shredder.
This shredder has a 4 position power switch:
REV Reverse – In the unlikely event of a paper jam, the reverse setting can be used to
help clear the cutters of paper that has not passed through. Never attempt to
clear a jam by using the reverse function until after you have emptied the bin.
OFF Off— This setting turns off all features of the shredder. For safety reasons, we
recommend that you leave the shredder in the “Off” position whenever the
shredder is unattended or not in use.
AUTO Auto—This setting allows the shredder to be automatically started by inserting
paper into the shred opening. Always feed the paper in as straight as possible.
When the paper has passed through, the shredder will automatically stop.
FWD Forward—This setting allows the shredder to run continuously.
Maintenance
Regular emptying of the bin is important to ensure the smooth operation of the cutting
cylinders. The shredder will not operate when the bin is full. Regular oiling is also necessary
for proper performance. It is recommended to use shredder oil every few weeks. Apply
across shredder entry, then run a single sheet through.
CLEANING
Always unplug the shredder before cleaning!
• Only clean the shredder by wiping the unit with a dry soft cloth or towel.
• Do not clean or immerse shredder in water. Getting the unit wet may result in damage or
malfunction to the electrical components. If the shredder happens to get wet, be sure to
completely dry the unit immediately with a soft cloth or towel.
• Never use anything flammable to clean the shredder. This may result in serious injury or
damage to the shredder.
Troubleshooting
If you have a problem with your shredder, check the symptoms and remedies below.
If you cannot solve the problem this way, contact Black & Decker paper shredders
Customer Service. Do not open shredder head to attempt repair: It could expose
you to electric shock and will void your warranty. WARNING: Hazardous moving parts. Keep fingers and other body parts away.
WARNING: To reduce risk of fire, electrical shock or injury:
NEVER allow children to operate a paper shredder, even under adult supervision.
A paper shredder is NOT a toy.
DO NOT use flammable synthetic oil, petroleum-based products or aerosols of any kind
on or near product at any time.
DO NOT operate any electrical product with a damaged cord.
AVOID getting jewelry, hair or loose clothing too close to feed slot as serious injury can occur.
DO NOT handle plug or product with wet hands.
ALWAYS keep children and pets away from the shredder.
ALWAYS unplug shredder when not in use.
DO NOT attempt to feed more sheets of paper than specified on the feeder.
DO NOT attempt to shred materials other than paper or credit cards.
ALWAYS empty the wastebasket prior to becoming full.
DO NOT place shredder near heat or water source.
DO NOT open shredder head to attempt repair: It could expose you to electric shock and
will void your warranty.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
The Following Are Important Safety Instructions.
Read All Instructions Before Using.
1
- Check to see if bin is full. If bin is full, follow instructions
under maintenance.
- Oil cutting cylinder. Shredder squeaks, grinds
or runs below capacity.
- No action required.
This is a self-cleaning function. Shredder continues to run
for 2 or 4 seconds after
shredding has been
completed.
Symptom Remedy
- Make sure shredder is plugged in and Power Switch (1) is
in the ON (–) position.
- Wait 30 minutes for shredder to cool down before trying again.
- Make sure that the shredder is properly mounted to the base.
The shredder has a safety power cut off if it is not properly
mounted to the base.
In case of a paper jam, which may occur if the sheet capacity is
exceeded or if the paper is not put in straight. To clear a jam:
1. Move the Function Switch (2) to the REV (II) position.
The shredder will reverse to clear the jam.
2. If the shredder jams in reverse, move the Function Switch (2)
to the AUTO (I) and allow it to run for about 5 seconds.
3. If the jam still does not clear, unplug shredder and carefully
grasp the paper and pull out slowly.
4. Once the jam is cleared, plug in and move the Function
Switch to AUTO (I) for continued shredding or OFF (O) if
shredding is complete.
Shredder does not start
or stops while shredding.
Paper jam.
W A R N I N G KEEP OUT OF REACH OF CHILDREN
ON/OFF/REV
Switch
2
Easy Carrying
Handle
3 Indicator
Lights
4
Release
Button
5
Safety
Shield
6 Viewing
Window
7 Bin
Customer Service
Black & Decker has a toll-free help line for customers living in the United States
and Canada if you have any questions regarding our product. Our customer service phone
number is 1-800-297-5028 or visit our website at www.blackanddeckershredders.com.
Setup
• Mount the shredder securely to the base. This shredder features a safety power cut off
and will not operate if the shredder is not properly attached.
• A socket-outlet should be near the equipment and be easily accessible. Connect the
power cord to any standard 120 volt AC outlet.
figure 1 figure 2
figure 3
W A R N I N G
SKU #BD-VS600 SKU #BD-VS600 SKU #BD-VS600
NO
FASTENERS
NO
AEROSOL CANS
NOT
A TOY
NO LOOSE
CLOTHING
NO FINGERS
OR HANDS
NO
HAIR