Bissell 6221 - Manual (Page 6)

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
A
ssembly
6
Install Febreze® vacuum bag
never reuse a vacuum bag. use only bissell
bag model 3267 vacuum bags in your bissell
Velocity bagged vacuum.
prior to installing the febreze® bag, please
follow these steps:
1. Remove the plastic bag that contains the
febreze® bag, which was included with
your vacuum.
NOTE: If difficult to open, you
may need to use scissors to
carefully cut open the bag.
2. locate the febreze® scent tag at the
bottom seal of the vacuum bag. carefully
pull the tab along the perforated lines in
the center of the scent tag.
NOTE: Only a portion of the
overwrap should be removed.
3. discard the perforated piece of plastic
you removed and proceed with the
following installation instructions.
to install your vacuum bag:
4. unplug cleaner from electrical outlet.
5. Remove the bag tank and detach the
tank lid.
6. align the bag opening with the tank lid
inlet and attach the cardboard bag collar
to the tank lid.
7. attach the tank lid to the tank and reinsert
the tank into the vacuum cleaner. slide the
lock ‘n seal lever into the “lock” position
to secure the bag tank in place.
experience the odor elimination technology
and freshness of febreze® as you vacuum
with a febreze® vacuum bag.
NOTE: Do note operate vacuum
cleaner without a vacuum bag.
WARNING:
Do not operate cleaner
with damp or wet filters
or without vacuum bag
and all filters in place.
NOTICE:
Unscented replacement bags are
available on Bissell.com and through
BISSELL Consumer Care. See page
14 for ordering information.
2.
6.
7.
Febreze and related trademarks are owned
by The Procter & Gamble Company,
Cincinnati, Ohio and used under license by
BISSELL Homecare, Inc.