3D Robotics Telemetry Radio - Manual (Page 2)

MOUNT
CONNECT TO AUTOPILOT
Connect to the APM 2.5 or 2.6 telemetry port using
the 6-to-5-position cable.
2.6
Connect to the PX4 I/O telemetry
port using the 6-to-5-position cable. Connect to the Pixhawk telemetry
port using the 6-wire cable.
Mount the air module securely to your vehicle keeping the antenna clear of any propellers or moving
components. Ensure that the antenna is oriented vertically for maximum range.
CONNECT TO MISSION PLANNER
Use the micro-USB cable to connect the ground module to your laptop. In Mission Planner and APM
Planner ground station applications, select the communication option that shows
COM , set the rate
to 57600 , and select Connect . The radio will not connect unless the vehicle is powered. Use the Flight
Data screen to view your vehicle’s status and control missions in flight.
LEARN MORE
about installing a mission planner application for your laptop or tablet and interacting with the
autopilot using 3DR Radios (including retrieving flight data logs) at
planner.ardupilot.com .
Mission Planner