Configuration, Specifications, Support – 3D Robotics Digital Airspeed Sensor User Manual

Page 3

Configuration

To enable the airspeed sensor, connect Pixhawk to Mission Planner (or APM Planner for

OS X), and select the Advanced Parameter List under the Configuration tab. Locate the

ARSPD_PIN parameter and set to 65. Select Write Params to apply.

For instructions on downloading software and connecting Pixhawk, visit

Specifications

Measurement Specialties 4525DO sensor, one psi measurement range

(roughly up to 100 m/s or 360 km/h or 223 mp/h)

Resolution of 0.84 Pa

Data delivered at 14 bits from a 24 bit delta-sigma ADC

M3 / 6-32 mounting holes

For customer support, contact us at

or call our support line at

+1 (858) 225-1414

Monday through Friday, from 8 am to 5 pm, PST.

Support