X-1 (H2O Audio) XC1-BK-X - Manual

Copyright Notice: This owner’s manual is copyrighted, all rights reserved. It may not, in whole or in part, be copied,
photocopied, reproduced, translated, or formed into any electronic format without prior consent in writing. The X-1
name, logo, and trade dress are trademarks of X-1 Audio, Inc. Apple, iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. X-1 products are protected by US Patents 6396769, 6614722, 6954405,
7263032, 7535799, 7755975, 8223997 and others pending.
2. What happens if the waterproof headphones become disconnected from
the case?
As long as the case is not submerged underwater for long periods of time, it should be fine. The
longer the case is submerged underwater, the higher the possibility water can enter the case
through the stereo jack. If headphones detach from the case, we suggest getting that connection
back together as soon as possible.
3. What headphones are compatible with X-1 Waterproof Cases?
X-1 Waterproof Armbands are designed to work with X-1 Waterproof Headphones and standard
3.5mm headphones.The case should not be submerged underwater for long periods of time
without X-1 Waterproof Headphones plugged in as water may be able to enter the armband
through the stereo jack. IMPORTANT: X-1 Waterproof Armbands and Cases are compatible
with H2O Audio Waterproof Headphones.
4. Can X-1 Waterproof Cases be taken into a hot tub or sauna?
Sometimes. Since we do not control the laws of physics, so you should continuously check to
see if condensation is forming inside the case. This amount will vary from location to location
based upon the humidity in the air when the armband was originally closed. If any condensation
becomes visible within the case, STOP use immediately.
NOTE: For more FAQs please visit www.X-1.com/faq
1 YEAR LIMITED WARRANTY
X-1 Audio, Inc.’s one year limited warranty covers defects in materials and/or workmanship of all
X-1 branded product for 1 year from the date of original purchase. This warranty does not apply
to any products which have been neglected, altered, abused, used for a purpose other than the
one for which they were manufactured, repaired by customer or any party without X-1’s written
authorization, or used in any manner inconsistent with X-1’s instructions. Please refer to the care
and maintenance instructions for more details. Product manuals are available for download at
www.X-1.com/manuals on the X-1 website as well as packaged with the product.
Products must be purchased from an Authorized Dealer. This limited warranty is not valid for
product purchased through an unauthorized source. For a directory of X-1 Authorized Dealers,
please visit the store locator section on the company website. If you have questions as to
whether or not a dealer is authorized, please contact Customer Support.
X-1 will, at its sole discretion and without charging the customer, repair or replace any product
components that fail in normal use during the limited warranty period. The customer will be
responsible for the cost of shipping the product to X-1. X-1 will pay the cost of returning the
repaired or replacement product to the customer. IN NO EVENT WILL X-1’S LIABILITY TO
CUSTOMER EXCEED THE PURCHASE PRICE OF THE SPECIFIC PRODUCT SUBJECT TO
THE WARRANTY CLAIM.
The warranty is valid only for the original owner who purchases the product from an Authorized
Dealer. Transfers do not qualify for warranty protection.
X-1 reserves the right to replace any out-of-stock, discontinued, or limited edition product with a
comparable product. Discontinued products may not be available for warranty replacement.
TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY IS THE SOLE AND EXCLUSIVE REMEDY AND IS
IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT SHALL X-1 AUDIO, INC. BE LIABLE FOR ANY INDIRECT, PUNITIVE, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, PERSONAL PROPERTY CLAIMS REGARDING THIRD PARTY PRODUCTS,
OR SPECIAL DAMAGES, REGARDLESS OF WHETHER A CLAIM FOR SUCH DAMAGES IS BASED ON
WARRANTY, CONTRACT, NEGLIGENCE OR OTHERWISE. SOME STATES DO NOT ALLOW A LIMITATION
ON THE DURATION OF IMPLIED WARRANTIES OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
RETURN AUTHORIZATION
Prior to any return, a Return Authorization (RA) number must be obtained. To receive an RA
number, go online to www.X-1.com/ra and follow the instructions on how to return a product.
Proof of purchase from an Authorized Dealer will be required.
SAFETY INFORMATION
Please read this manual carefully. If you have any questions please contact X-1 Customer
Service prior to use.
Improper use of this system may cause the user to make mistakes or decisions that may lead to
serious injury or death.
Always make sure to have the audio player volume turned to zero and the headphones turned
away from the ears when turning on the audio player. If the volume level is not zero when the
audio player is turned on, it may cause ear injury due to a sudden burst of volume. The volume
should be slowly increased with an audio track playing to set the speaker volume to comfortable
output levels prior to positioning the headphones next to the ears. Hearing experts advise
against continuously loud and extended play. If you experience ringing in your ears, reduce
volume or discontinue use.
It can be potentially dangerous to use headphones while engaging in activities that require your
full attention. You should exercise extreme caution or discontinue use in potentially hazardous
situations. Do not use the headphones while driving, cycling, or operating any motorized vehicle.
It may create a traffic hazard and is illegal in some areas. Those users that elect to utilize this
system at, or near, the water’s surface, must maintain safety awareness of moving water crafts.
WARNING: Ear tips should always be used.
WARNING: Contains small parts which may be a choking hazard.
Not suitable for children under 3 years old.
WARNING: This product contains magnetic material.
Do not expose the armband to extreme heat, such as the inside of a hot car, or in
hot direct sunlight, such as on a beach, or boat deck. Doing so may cause damage
and subsequent flooding.
After in-water use, you should rinse your case off with clean water and let it air dry
for your next use. Strong detergents, soaps, and chemicals must never be used to
clean the case. For long-term storage, store out of direct sunlight.
MAINTAINING THE WATERPROOF SEAL
To clean the seal, remove it from the case and wash with warm fresh water. Strong
detergents, soaps, and chemicals should never be used to clean the seal. Allow
seal to air dry and install back into the case once dry. The life of a waterproof seal
is typically one year. Please contact X-1 Customer Support for replacement seals.
The silicone seal does not require lubrication. Do not use silicone grease to
lubricate the seal.
FAQ S
1. What MP3 players and phones are compatible with this case?
The Amphibx Go Case for large devices was designed specifically for the Apple iPhone and iPod
touch. However many smartphones and portable media players will fit into this case because of
the generous size of the opening and the flexible materials used. If your device does not fit,
please let us know so we can consider it for future products.
CONTROLLING YOUR IPHONE, IPOD TOUCH, OR OTHER DEVICES
The ClearTouch Pouch has been engineered to allow you to maintain complete
control over touch controls and push buttons featured on your device.
The ClearTouch Pouch was designed to be clear on both sides so when oriented
properly, you can use the camera on most devices including all iPhone models, the
iPod touch (4th Gen.) and many other devices.
USING THE REMOVABLE CARABINER
The lightweight removable carabiner is not suitable for climbing but does allow the
Amphibx Go Case to be attached to anything from belts to backpacks!
MAINTAINING YOUR AMPHIBX GO WATERPROOF CASE
Your Amphibx Go was specifically engineered to be durable enough to handle
damaging environments such as the pool, ocean, rain, and mud, yet made to be
light enough for everyday uses such as running, swimming, biking, hiking, and just
relaxing at the beach. With that said, it is not indestructible, so you need to use
reasonable care when using the Amphibx Go.
With so many environments, and so many uses, the one common message is that
you should always check the Amphibx Go before use to make sure it was not
damaged during your last activity.
CONNECTING YOUR HEADPHONES
Small Strain Relief with Small SealTight Connector Boot
Large Strain Relief with Large SealTight Connector Boot
The SealTight Connector Boot featured on the Amphibx Go is designed to create
a 100% waterproof connection with X-1 Waterproof Headphones (sold
separately) or the included Boot Plug.
The case should not be submerged under water for long periods of time without
X-1 Waterproof Headphones or the Boot Plug installed, as water could enter the
case through the open headphone jack.
X-1 Waterproof Headphones come with a strain relief in 2 different sizes. We
have included 2 SealTight Connector Boots for you to use based upon which X-1
Waterproof Headphones you have. Please see the images shown to see which
boot goes with which headphone plug.
In the event you would like to use the Amphibx Go without headphones you must
install the included Boot Plug, which provides a 100% waterproof seal. The Boot
Plug is double sided to accommodate the 2 different styles of SealTight
Connector Boots. See photos to determine which side to use
CHECKING THE WATERPROOF WELDS
In addition to the waterproof seal
in the lid, the Amphibx Go Case
features welded outer seams that
have been specifically designed to
prevent water from entering the
case.
Each X-1 case is inspected and
tested in a pressure chamber to
ensure it is 100% waterproof prior
to packaging.
Even with this level of care, you
still need to ensure the welds have
not been damaged by your
activities.
Take a moment to look at the
waterproof welds upon arrival. You
should perform a visual inspection
of the welds each time you install
your device in the case.
CHECKING THE WATERPROOF SEAL
The X-1 Amphibx Go Case features a removable seal that forms a waterproof
barrier between the base and lid of the case.
It is extremely important that special attention is paid to ensure the seal is
completely seated in the groove of the lid. If the seal is loose, out of alignment,
twisted or pinched in any way, it will compromise the waterproof integrity of the
armband and should not be used. Any debris such as hair, sand, surf wax or mud
will prevent it from forming a watertight barrier and should be cleaned off before
use.
It is extremely important that you ensure the seal is clean and properly seated each time
you close the lid. Failure to do so may ruin your device in the armband.
If the seal comes out of alignment, carefully place it back into the groove, ensuring
all 4 corners are correctly installed. Close the lid into the base and then re-open it
to make sure the seal is fitted correctly into the groove. The seal should appear
straight and uniform along all edges and should not fall out easily.
Waterproof Seal
5. Arrange any excess cord so that it
will not interfere when closing the lid.
1. Pull the latch hook away from the lid. 3. Plug in 3.5mm Stereo Cable from
inside the case into your device. 4. Slide device inside and align device in the
ClearTouch Pouch. To use your device’s camera,
be sure to position camera lens so it can be seen
though the ClearTouch pouch.
7. Once lid is closed, double check that
the lid is fully seated, and that the latch
has snapped into place. Failure to do so
could cause the lid to open during use. 8. Always check your case for obvious signs of wear
and check with Customer Service if you have any
questions about the condition of your case. If you take
care of your Amphibx Go, it will take care of you!
2. Holding latch hook open, lift on the tab of the lid.
6. Before closing the lid, ensure the seal is clean,
seated properly and that there is nothing in the way
that would prevent the lid from fully closing. Close lid.
INSTALLING YOUR DEVICE
Lid Tab
INTRODUCTION
The X-1 Amphibx Go Case allows you to utilize all of your favorite features on the
iPhone
® , iPod touch ® , most other MP3 players and smartphones in, around and
underwater.
USING YOUR WATERPROOF CASE
We have tested your Amphibx Go to be waterproof to a depth of 12 ft. prior to
making its way to you. Even so, we strongly recommend that you test it yourself
according to the following instructions, making sure that you understand how to
properly prepare it for use in the water. We recommend that you test the product
without a phone or media player inside before initial use.
1. Open the LatchTight Locking Lid.
2. Verify the seal area is clean and free of debris or damage.
3. Close and lock the armband without a phone or media player inside.
4. Plug in X-1 Waterproof Headphones (sold separately) to the SealTight
Connector Boot
5. Submerge the system in water and soak for 30 min.
6. Manipulate the pouch during submersion.
7. Remove from water and dry exterior so water does not fall inside when opened.
8. Before opening, check to see if there is water inside the armband.
9. Open the case and ensure there is no water inside.
DO NOT USE IF WATER IS FOUND INSIDE PLEASE CONTACT X-1 CUSTOMER SUPPORT IMMEDIATELY.
SealTight Connector Boot
Stereo Plug Cable
ClearTouch Pouch ClearTouch Pouch
Waterproof Weld
LatchTight Locking Lid
FRONT VIEW BACK VIEW
TOUCHSCREEN AND
CAMERA FRIENDLY
SUBMERSIBLE
WATERPROOF
RINSABLE
Carabiner
Boot Plug
CARABINER IS NOT FOR CLIMBING
Customer Support is available:
Monday - Friday 9
AM to 5 PM PT
www.X-1.com
P. 800.708.6080 or 858.623.0339
E. [email protected]
F O R T H E M O S T U P TO DAT E M A N UA L S P L E A S E V I S I T U S AT W W W. X - 1 . C O M / M A N UA L S
AMPHIBX GO
SOFT CASE
WATERPROOF
WEATHERPROOF
SWEATPROOF
FITS IPOD ® , IPHONE ® AND MOST SMARTPHONES