WORX WU334 900W SDS Rotary Hammer Drill 240V - Manual (Page 6)

6
Technical data
Type Wu334 (330~359-designation of machinery,
representative of Rotary Hammer drill)
Voltage 220-240V~50/60Hz
Power input 900W
No load speed 0-720/min
Impact rate 0-3500bpm
Impact energy 5.5J
Chuck type SDS-plus
Max drilling capacity
Steel
13mm
Masonry 32mm
Wood 40mm
Protection class /II
Machine weight 4.9kg
Noise information
A weighted sound pressure L
PA
:91dB(A)
A weighted sound power L
WA
:102dB(A)
K
PA
&K
WA
3.0dB(A)
Wear ear protection when sound pressure over 80dB(A)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Vibration information
Vibration total values (triax vector sum) determined according to
EN 60745:
Hammer drilling into concrete
Vibration emission value
a
h,HD
=15.3m/s 2
Uncertainty K=1.5m/s 2
Chiselling
Vibration emission value
a
h,Cheq
=12.9m/s 2
Uncertainty K =1.724m/s²
Warning: The vibration emission value during actual use of the
power tool can differ from the declared value depending on the ways
in which the tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and
in good condition.
The tightness of the grip on the handles and if any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.
this tool may cause hand-arm vibration syndrome if its use is
not adequately managed.
Warning: To be accurate, an estimation of exposure level in
•
•
•