Operation – WORX WU675 12V 1.3 Ah Lithium Ion Sonicrafter User Manual

Page 10

Operation

warning: Do not touch the gear box after long working time,

because it could be hot.

MoUNtiNG tHe tool (See fig. B1, B2)

caution: For all work or when changing application tools, always

wear protective gloves. Avoid danger of injury from the sharp edges
of the application tools. Application tools can become very hot while
working, presenting danger of burns!

warning: to reduce the risk of injury, do not let the Universal

end cut blades or any segment saw blades face back toward the
user’s hand.
Unscrew the bolt and remove the fastening piece (8).
Clean the tool holder, the application tool and bolt and fastening piece
(8).
Place the application tool exactly onto the hex-shaped tool holder.
Note that the application tool has a flush fit.
Reposition the fastening piece (8) and tighten the bolt using the
supplied Allen key.

aDaPteR(22)(See fig. B3)
Accessories of other brands(Fein

, Bosch

) can be fitted onto the

Sonicrafter

brand tool using the adapter.

Note: Fein is a registered trademark of C. & E. Fein GmbH. Bosch is a
registered trademark of Robert Bosch GmbH.
1) Use the Allen Key (24) to unscrew the fastening piece (8) and then
remove it from the tool holder.
2) Clean the tool holder, the adapter the application tool and the
fastening piece.