Wood’s Powr-Grip LB4CSO - Manual

Rev 1.0/3-09 APPENDIX • OPTION LB4CSO #35200: 1
MT CENTER SPOOL LIFT BAR
S
PECIFICATIONS
Model Number: LB4CSO
Weight:
4 lbs [2 kg]
Note: Make sure to add the weight of all options to the Lifter Weight when
you are selecting appropriate hoisting equipment (see ASSEMBLY in main
instructions).
Function: By eliminating the need for slings or other rigging, this option allows the hook
of hoisting equipment to attach directly to the lift bar of the vacuum lifter,
thereby reducing the overhead clearance requirement.
A
SSEMBLY
Follow the directions for ASSEMBLY of the vacuum lifter, as directed in the main instructions, but
adjust the procedure as follows for the center spool lift bar: Disregard the directions about lift
slings. Instead, attach the hoisting equipment hook directly to the lift spool.
1
WARNING: Hoisting equipment hook must be fitted with restraining latch to
prevent lift spool from slipping off under any circumstances.
Note: Any application of the lifter must conform to all statutory or regulatory standards that
relate to the hoisting equipment when used in its geographical location (eg, relevant OSHA
standards in the USA).
I
NSPECTIONS AND
T
ESTING
When performing inspections and tests of the lifter as directed in the MAINTENANCE section of
the main instructions, be sure to include the center spool lift bar whenever applicable.
1
When this option is used with the Vacuum Package Mounting Bar (option LB5MBO), consult that option appendix for additional
directions.