Maintenance, Replacement parts – Wood’s Powr-Grip CM1COWB User Manual
Page 5

Rev 1.0/9-13
3
CM1COWB: #35180AFT
Always activate vacuum pads in a symmetrical configuration, to keep the lifter balanced while
lifting, and use as many pads as possible for each load, to maximize lifting capacity and to
minimize load overhang. Since the allowable overhang is different for each kind of load material,
consult the lifter's instruction manual to determine allowable overhang. Make sure that all
activated pads will fit entirely on the load's contact surface and that they will be loaded evenly
while lifting. After confirming that the configuration of activated pads is appropriate for a specific
load, apply the lifter to the load as directed in the lifter's instruction manual.
WARNING: Never allow any pad shutoff to be opened or closed while lifting.
Opening or closing a pad shutoff while the lifter is supporting a load could result in the release of
the load and possible injury to the operator or others. The operator must take all appropriate
measures to prevent any person or object from accidentally moving the lever of a pad shutoff
during the lift.
MAINTENANCE
When performing inspections and tests of the vacuum lifter as directed in the MAINTENANCE
section of the lifter's instruction manual, be sure to include each Individual Pad Shutoff whenever
applicable.
REPLACEMENT PARTS
Stock No.
Description
Qty.
93012
Pad Shutoff Valve w/Brackets
as required
SERVICE ONLY WITH IDENTICAL REPLACEMENT PARTS
SUPPLIED BY OR APPROVED BY WOOD'S POWR-GRIP CO., INC.