Wood’s Powr-Grip STT1 - Manual (Page 3)

Rev 8.0/6-12 1 STT1: #35151
SPECIFICATIONS
Model Number: STT1 (includes STT base kit and STTTF table top surface)
Maximum Load Capacity: 500 lbs [225 kg]
Load Characteristics: Flat sheet material
Maximum thickness = 2" [5 cm]
Load Tilting Capability: Manual, 80° flat/upright load orientation
Dimensions: Table top = 69¼" x 96" [1759 mm x 2438 mm]
Table height = 35½" [902 mm]
Folded width = 27" [686 mm] with load support rollers
Folded height = 83" [2108 mm]
Weight: 414 lbs [188 kg] (334 lbs [152 kg] without table top surface)
WARNINGS
Powr-Grip is pleased to offer the most reliable materials handling products
available. Despite the high degree of security provided by this tilt table, certain
precautions must be observed to protect the user and others.
Always wear personal protective equipment that is appropriate for the material being handled.
Follow trade association guidelines.
Never use a table that is damaged, malfunctioning, or missing parts.
Never remove or obscure warning labels.
Never use a table if the load capacity or any warning appears to be missing or obscured.
Never exceed the load capacity or attempt to handle loads the table was not designed for (see
SPECIFICATIONS).
Never attempt to handle cracked or broken glass with this table.
Always position yourself and others to avoid injury in the event that the load shifts unexpectedly
while using the table.
Never allow people to ride or stand on the table or the load being handled.
Never leave tilted loads unattended.
Always remember that modifications to the table may compromise its safety. Woods Powr-Grip
cannot be responsible for the safety of a table that has been modified by the customer. For
consultation, contact Wood's Powr-Grip.