Wood’s Powr-Grip N4000DGT - Manual (Page 2)

• Always avoid conditions that could cause a vacuum pad to slip or to
disengage prematurely, such as: contaminants, cuts or scratches in the
pad face or mounting surface; attaching the devise to porous materials; or
applying pressure against the pad edge.
• Never use the devise when the red line is visible. If the red line reappears
frequently, discontinue use and see MAINTENANCE: Service.
• Always position yourself and others to avoid injury in the event that the
vacuum cup disengages or the material dislodges unexpectedly.
• Never allow anything to interfere with free movement of the plunger while
the vacuum cup is attached.
• Never touch a vacuum release mechanism (see OPERATION: To Release)
when applying pressure to the pry bar. This may result in loss of vacuum
and unexpected release of the vacuum cup.
• Never leave the devise engaged and unattended.
• Never use harsh chemicals (such as solvents or gasoline) or unauthorized
rubber cleaners and conditioners to clean the devise.
• Always wear personal protective equipment that is appropriate for the
material being handled. Follow trade association guidelines.
• Always operate the devise under conditions approved for its design (see
SPECIFICATIONS).
• Never operate the devise if it is damaged, malfunctioning, or missing parts.
• Never operate the devise if the sealing edge of the vacuum pad is cut or
otherwise damaged.
• Never remove or obscure warning labels or operate the devise if any warning
appears to be missing or obscured.
• Always make certain the contact surfaces of the material and the vacuum
pad is clean prior to applying the vacuum cup (see MAINTENANCE).
• Never attempt to attach to cracked or broken glass with this devise. Always
position the vacuum pad correctly on the material prior to prying (see
OPERATION).
• Never pry on the material when the vacuum indicator shows inadequate
vacuum.
• Always keep other personnel far enough away from the operation to avoid
injury in the event of an unexpected load release or material breakage.
• Always protect all surfaces which could be damaged in the event of an
unexpected load release or material breakage.
• Always remember that modifications to the devise may compromise its
safety. Wood’s Powr-Grip cannot be responsible for the safety of any devise
that has been modified by the customer. For consultation, contact Wood’s
Powr-Grip.
LIMITED WARRANTY
TO OBTAIN WARRANTY SERVICE
For purchases in North America:
• Please include your name, address and phone number;
• Indicate WARRANTY RETURN;
• Ship product–prepaid–DIRECTLY TO MANUFACTURER at:
Wood’s Powr-Grip Co., Inc.
908 West Main
Laurel, MT 59044 U.S.A.
For purchases in all other localities:
• Return product to point of purchase.
RETAIN ThIS INFORMATION FOR YOUR RECORDS.
Purchased From
Date Purchased
Model No.
Serial No. (if present)
PARTS
1 90154 Plunger Assembly, ABS
2 49486T Rubber Vacuum Pad, 8” Dia.,
Flat (G0695)
3 Red Line Vacuum Indicator
4 10002 Screw, 1/4-20 x 1/2” Pan Head
Phillips Machine Screw
5 90151 Handle / Valve Assembly, ABS
6 Vacuum Valve Release Lever
7 Handle Grip - 1” ID
8 30” Pry Bar
9 10080 ¼-20 x ½” Thumb Screw
10 13512 3/8” x 2” Cotterless Hitch Pin
11 13520 3/8” x 3” Cotterless Hitch
12 4¼” Pressure Pad (Standard)
13 18” Wide-Base Pressure Pad
(Optional)
Limited Warranty
Instructions for Use,
Maintenance and Care
Rev. 0.0 / 06-10 Instruction Sheet: DGLAZER
13
11
12
6
8
7
9
4
10 3
1
2
5
Wood’s Powr-Grip vacuum cups are carefully constructed, thoroughly
inspected at various stages of production, and individually tested. They are
warranted to be free from defects in workmanship and materials for one year
from the date of purchase. If a problem develops during the warranty period,
return the complete product as directed below. If inspection shows that the
problem is due to defective workmanship or materials, the product will be
repaired or replaced without charge.
WARRANTY DOES NOT APPLY WHEN:
Rubber portions have been cut or scratched during use.
Repairs are required due to abnormal wear and tear.
The product has been abused, misused or neglected.
Alterations have been made to the product.
A problem not covered under warranty will be corrected automatically, unless
the customer includes a written request for notification of costs prior to
repair. Otherwise the customer assumes all responsibility for repair costs and
agrees to receive the repaired product on a C.O.D. basis.
WARNINGS (continued)