Wolo 3550 SERIES Wolo-Aurora - Manual (Page 2)

ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF THREE (3) MONTHS.
UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase. Provide with the
return a brief description of the problem with a daytime telephone number. Also, include with the return a check or money order in the amount
of $20.00 to cover return shipping. Mail to:
Wolo Manufacturing Corp.
Attn: Warranty Service
One Saxwood Street
Deer Park, NY 11729
E-mail: [email protected]
© 2008 Wolo Mfg. Corp
All Rights Reserved.
1 7. Replacement bulb type: use only halogen 796 / 35watt halogen, 12 volt.
Current draw: 2.73 amps.
1 8. Rotate the reflector by turning it with your finger until the bulb can be
easily accessed for removal.
1 9. To remove the bulb simply press down and turn counter clockwise. The
bulb should easily be able to be removed from the socket. Dispose the
bad bulb out of reach of children and in an environmentally safe manner.
10. Never handle the glass of the new bulb with your fingers, doing so will
shorten service life. If by accident you touch the bulb, clean with
household glass cleaner.
11. Position the bulb into the socket, depress the bulb and turn clockwise.
12. IMPORTANT: There is a rubber gasket on the each edge of the lights
base. Make sure the gasket is positioned properly into the lens to
prevent water and dirt from entering inside the light. Place the lens back
onto the light’s base and secure the nameplate to the lens with screws
that were removed earlier.
CLEANING
A scratched, dull or dirty lens, reflector or mirror can cause a reduction in brightness of warning light. Never use a
caustic or petroleum base cleaner on any surface of the warning light. For best cleaning results, always use
household glass cleaner or mild soap with a soft lint free rag. If the lens, reflector or mirror have scratches, or are
dull, it is recommended those components be replaced so to ensure maximum brightness of the warning light.
Warranty
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for three months from the date of purchase, that
this product is free from defects in workmanship and materials. If there is such a proven defect, Wolo, at its option, will either
repair or replace the item free of charge, if it is returned to Wolo within three months from the date of purchase together with
proof of purchase as described below. Wolo reserves the right to inspect any defect prior to settling any warranty claim by repair
or replacement. This warranty is limited as above provided and Wolo will not be responsible for fire or other casualty or accident,
due to neglect, abuse, abnormal use, modifications, faulty installation of this product, or natural causes.
Fig 4
Gasket