Blaupunkt ACM 5450 - Manual (Page 11)

ACM 5450
22
Tape operation
Inserting a tape
• Turn on the set.
• Insert a tape.
Insert the tape with side A or 1 showing up, the
open side facing to the right.
= Press to eject the tape.
The tape will be played in the direction used
last.
“TR1-PLAY” in the display means that track
1 or A is being played.
Removing a tape
• Press .
The cassette will eject.
Fast Forward/Rewind
Fast Forward
•
Press FF.
At the end of a tape side, the mecha-
nism changes directions automatically
to play the other side.
Automatic seek tuning start
Prerequisite:
The priority for traffic announcements has
been activated.
When leaving the reception area of the tuned
in traffic programme station while listening to
a tape or CD or after having turned down the
volume completely, the system will automa-
tically start searching for a new TA program-
me.
If no such station is found within approxima-
tely 30 seconds, tape or CD operation will be
stopped and a warning beep will sound. To
switch the warning beep off, proceed as
described above.
Adjusting the volume for traffic
announcements and the warning
beep
This volume was preset at the factory.
Stopping Fast Forward operation
•
Press FR.
Fast Rewind
•
Press FR.
At the beginning of the tape, the me-
chanism will automatically start play-
back.
Stopping Fast Rewind operation
•
Press FF.
Fast winding
FR : Fast rewind; stop by pressing FF.
FF : Fast forward; stop by pressing FR.
To switch to the other side of the
cassette tape:
Press both buttons simultaneously.
The display shows “TR1-PLAY” or
“TR2-PLAY”.