Waring Pro WPM28 - Manual (Page 6)

6
BEFORE FIRST USE
Make sure the popcorn maker is unplugged before you perform
the following:
1. Check to be sure the voltage (120V – 60 Hz) is suitable to
your home.
2. Clean the internal surface of the kettle with warm soapy
water; rinse well and dry with a clean cloth. Wipe down
inner and outer housing with a damp cloth. Be sure that all
parts are completely dry before assembly.
ASSEMBLY PROCEDURE
1. Run the kettle stirrer
through the opening in
the center of the kettle
lid. Insert the top of the
kettle stirrer into the top
of the main housing and
turn counterclockwise
to secure in place.
2. Place the kettle onto
the kettle hook on the
left side of the main
housing. Raise the
kettle so that it rests
on the top of the kettle
release tab.