Troubleshooting, Cleaning and maintenance – Waring Pro CC150 User Manual
Page 11
11
TROUBLESHOOTING
Problems Reasons
Solutions
Loud noise occurs
The bowl is not secured on
Reassemble or try to lock
when operating
the motor/heater housing,
floss head tightly
or the floss head is not
secured to the motor base
Cotton candy blowing The machine is placed
Place the machine on
unevenly in the bowl
on an uneven surface
on a flat surface
CLEANING AND MAINTENANCE
1. Make sure that the power is off and the appliance
is not connected to a power source.
2. Wait for minimum 30 minutes’ cooling time.
3. Remove the splashguard and bowl, and disassemble
to wash separately.
NOTE: To remove splashguard from the bowl, carefully
grasp the splashguard from the highest point and lift
upwards to release the locking latches.
4. Remove the floss head, wash with warm water.
5. Do not wash the motor base with water; use a
HOT,
damp cloth when cleaning the unit.
NOTE: Any other servicing should be performed by an
authorized service representative.