Waring Pro MX1000RXT - Manual (Page 2)

2 3
IMPORTANT UNPACKING
INSTRUCTIONS
1. Place the box containing your Waring Pro ® blender on a flat
sturdy surface before unpacking.
2. Open corrugated flaps.
3. Remove instruction book and any printed materials from top
of box.
4. Pull up corrugation and remove. Remove jar and padding.
CAUTION: Sharp blade inside blender jar.
5. Remove corrugated insert. Remove blender base from box
and set aside.
6. Replace all corrugated inserts in the gift box and save the
box for repacking.
REPACKING INSTRUCTIONS
1. Place blender on a large, sturdy flat surface.
2. Carefully place blender base in bottom of box.
3. Place long corrugated insert over base.
4. Insert blender jar and padding.
5. Close and seal box for shipping.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
1.
READ ALL INSTRUCTIONS BEFORE USING.
2. Unplug from outlet when not in use, before putting on or
taking off parts, and before cleaning.
3. To protect against electrical hazards, do not immerse the
blender base in water or other liquid.
4. Do not use carbonated liquids in the blender jar, or any
blending container. Using carbonated liquids in the
blender jar or any blending container may result in injury.
5. Close supervision is necessary when any appliance is used by
or near children.
6. Avoid coming into contact with moving parts.
7. Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions or is dropped or damaged
in any manner. Return appliance to the nearest authorized
service facility for examination, repair, or electrical or mechanical
adjustment.
8. The use of attachments including canning jars not recommended
by the appliance manufacturer may cause hazards.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter, or touch hot
surfaces.
11. Keep hands and utensils out of container while blending, to
prevent the possibility of severe personal injury and/or damage
to the blender. A rubber scraper may be used, but must be used
only when the blender is not running.
12. Blades are sharp. Handle carefully.
13. Always operate blender with lid in place.
14. When blending hot liquids, remove center piece of two-piece lid.
See Hot Blending instructions.
15. The use of ear protection is recommended during extended
operating periods.
16. See Cleaning and Sanitizing instructions for all Waring Pro ®
Blenders. NOT FOR WATERJET CLEANING.
17. Do not operate your appliance in an appliance garage or under a
wall cabinet. When storing in an appliance garage, always unplug
the unit from the electrical outlet. Not doing so could create a
risk of fire, especially if the appliance touches the walls of the
garage or the door touches the unit as it closes.
SAVE THESE INSTRUCTIONS
MX1000R (Model: MXMPBKP6) BLENDER SPECIFICATIONS
• Capacity: 64 oz. working capacity
• Switch Settings: (2 Speeds)
Hi Low Pulse
• Speed (RPMs) 30,000 26,000 30,000
• Rating: 120 Volts - 12.0 Amps
• Base Material: Polycarbonate
• Bearing: High Precision Ball Bearing
• Cord: 6-Foot Three-Conductor Ground Cord With
Strain Relief in Base
• Overall Height: 19 inches
• Weight: 15 lbs.
• cETLus, NSF listed
• Operating Cycle: 1 min. ON/3 min. OFF