Walker Edison Furniture BTOL Sunrise Twin/Loft Metal Bunk Bed User Manual

Page 13

Secure front guardrail (13) to crossbar (10) using large bolts (B) and large washers (E). Secure

back guardrail (13) to crossbar (11) using large bolts (B), large washers (E) and, where applicable,

angle brackets (G).* Tighten large bolts (B) with large wrench (L).

*OPTIONAL: Angle brackets (G) can be used to attach the bed to a wall for additional support. You must use hardware

suitable for the particular wall type, which is not included as there are many different wall types. You must also mount the

bed to the structure of the wall (i.e. wood studs, metal studs or cement/brick) directly. DO NOT attach the bed to the

surface of the wall without anchoring into the structural framework of the wall. Please seek professional advice if you are

unsure of your own ability to do this correctly. Walker Edison Furniture Company makes no representation of warranty,

expressed or implied, to the strength of any structure and the wall’s ability to hold your bed. You assume all responsibility

and indemnify Walker Edison Furniture Company of any and all damages that may be incurred by attaching your bed to

the wall.