Blaupunkt WIESBADEN RCM 85 - Manual (Page 6)

Wiesbaden RCM 85
22
Tape operation:
TR1--PLAY - Side 1 (or 2)
MTL
- Metal
B - Dolby B-NR
CD changer operation (optional):
CD 05 - Disc number
T 02 - Title number
< Fast winding/PROG button
To switch to the other side of the
cassette tape:
Press both buttons simultaneously.
The display shows TR1-PLAY or TR2-PLAY.
FR : Fast rewind; stop by pressing FF.
FF : Fast forward; stop by pressing FR.
= SC/MIX
Radio operation
Scan (sampling all stations to be recei-
ved): Press SC/MIX briefly.
Preset Scan (sampling all stations
stored on the preset buttons): Press
SC/MIX for approximately 2 seconds.
Changer operation (optional)
See chapter “CD changer control”.
> SRC (Source)
To switch between the available audio
sources, e.g. tape, radio, CD changer
(optional).
? 1, 2, 3, 4, 5, 6 - preset buttons
You can store six stations on each me-
mory bank (I, II, T).
To store a station: Press button during
radio operation and hold down until the
radio resumes play.
To recall a station: Select the desired
memory bank by pressing the FM or TS
button as many times as required. Then
press the corresponding preset button
briefly.
@ TA (priority for traffic announcements)
If “TA” is displayed, the system will play
traffic stations only.
TA on/off: Press button.
A TS - Travelstore
To store the six most powerful stations
automatically with Travelstore:
Store: Press TS until seek tuning starts
in the display.
Recall: Press TS, “T” is indicated in the
display. Then briefly press one of the
presets 1, 2, 3, 4, 5, 6.
B FM
To select one of the FM memory banks
I and II.
To change the memory bank:
Press button until the desired level is
indicated in the display.
Recall: Press FM
T as many times until
the display shows “T”. Then briefly
press one of the preset buttons 1, 2, 3,
4, 5, or 6.