Vortex Optics RAZOR 8X42 BINOCULAR - Manual (Page 6)

Attaching the neckstrap
1. Starting with the right
barrel, push the right end
of the strap through the
right strap attachment
point. Push a workable
amount of strap through.
2. Loop the strap over
the attachment point
and insert into the
strap buckle.
3. Push the strap through
the buckle.
4. Secure the excess strap
by putting it into the
strap loop.
5. Continue with the left
side of the strap in the
same manner as the right.
Your binocular strap is
now secured, though you
may feel the need to
adjust the strap to get the
best fit.
Note: if you wish to attach
the rainguard (the one-piece
eyepiece guard) to the strap,
push the strap through the
left slot of the rainguard
before putting the strap through that side of the binoculars.
Using the tripod adapter
The Razor features a socket with a standard threading
located between the two objective lens barrels for adapting your
binoculars to a
tripod using a
tripod adapter
(both pieces sold
separately). Simply
unscrew the socket
cap and thread the
tripod adapter into
the socket.
6 7