Vip w – Vortex Optics SPARC II RED DOT User Manual
Page 7
RED DOT
13
12
m
AInTenAnCe
Cleaning
The SPARC II red dot will require very little routine maintenance other
than periodically cleaning the exterior lenses. If desired, the exterior may
be cleaned by wiping with a soft, dry cloth.
When cleaning the lenses, be sure to use products that are specifically
designed for use on coated optical lenses such as the Vortex Lens Pen and
FogFree Cleaning Kits.
• Be sure to blow away any dust or grit on the lenses prior to wiping the
surfaces.
• Using your breath, or a very small amount of water or pure alcohol,
can help remove stubborn things like dried water spots.
Lubrication
All components are permanently lubricated, so no additional lubricant
should be applied.
Note: Do not attempt to disassemble any components of the red dot.
Storage
Use the included lens cover to protect the lenses when not in use.
• Remove the battery before putting in storage for extended periods.
• Avoid storage in direct sunlight or in any very hot location.
• Storage and use in extreme cold will shorten battery life.
Lifetime Warranty
Unlimited
Unconditional
T
he
VIP w
ArrAnTy
We build optics based on our commitment to your absolute satisfaction.
That’s why Vortex products are unconditionally guaranteed and we
make this Very Important Promise to you—a Very Important Person.
Rest assured that in the event your SPARC II becomes damaged or
defective, Vortex Optics will repair or
replace the red dot at no charge to you. Call
Vortex Optics at 800-426-0048 for prompt,
professional, and friendly service.
Visit www.vortexoptics.com for more information. Canadian customers
may visit www.vortexcanada.net for customer service information.
Note: The VIP warranty does not cover theft, loss, or deliberate damage
to the product.
Vortex Optics
2120 West Greenview Drive
Middleton, WI 53562