Windage and moving targets, Basic windage correction on center crosshair, Example – Vortex Optics RAZOR HD GEN II 1-6X24 RIFLESCOPE — VMR-2 Reticle User Manual
Page 6

11
10
RETICLE
Windage and Moving Targets
The VMR-2 reticle is highly effective when used for wind and
moving target leads. Using the reticle for effective windage and
moving leads will require a thorough knowledge of your cartridge’s
ballistic performance under varying conditions and experience in
reading wind strengths and target speeds. As in bullet drops, it is
imperative the shooter learn their particular weapon’s windage/
moving target corrections in MOAs rather than inches or mrads.
Always hold the reticle into the wind when correcting for wind
drift.
When dialing elevation come ups, the center horizontal crosshair
will be used for windage or moving target leads. MOA marks on
the horizontal and vertical crosshairs are graduated in 4 MOA
increments.
Basic windage correction on center crosshair
8 MOA r
eticle correction for 15 mph wind at 600 yards. Elevation is
already dialed into turret.
15 mph wind
Full value wind at 90 degrees
Example
When dialing elevation come ups, the center horizontal crosshair
will be used for windage or moving target leads. MOA marks on
the horizontal crosshair are graduated in 4 MOA increments.