Behringer TRUTH B1030A - Manual (Page 4)

Page 4 of 4
©2009 Red Chip Company Ltd. Technical specifi cations and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be
suff ered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. All trademarks (except BEHRINGER, the BEHRINGER logo, JUST LISTEN, TRUTH, XENYX and V-AMP) mentioned
belong to their respective owners and are not affi liated with BEHRINGER. energyXT2.5 and the energyXT2.5 logo are trademarks of XT Software AS. 985-10000-00400
behringer.com
For service, support or more information contact the BEHRINGER location nearest you:
BEHRINGER Australia tel.: +61 3 9877 7170, fax: +61 3 9877 7870 BEHRINGER Germany tel.: +49
2154 9206 4149, fax: +49 2154 9206 4199 BEHRINGER Japan tel.: +81 3 5281 1180, fax: +81 3 5281
1181 BEHRINGER Singapore tel.: +65 5845 1800, fax: +65 6214 0275 BEHRINGER USA / CANADA
tel.: +1 425 672 0816, fax: +1 425 673 7647
Hearing is Believing
We could bore you to tears with all
the technical jargon (if you really like
that stuff , there’s a special treat at the
end), but hearing the TRUTH will make
you a believer. From the “bulletproof”
bass of its Kevlar woofer to the silky
top-end of its HF dome tweeter, we
think you’ll agree that nothing in
this class outperforms the B1030A.
Compare them to the competition and
own BEHRINGER!
AUDIO INPUTS
XLR connector servo-balanced input
¼" TRS servo-balanced input
RCA servo-balanced input
Input impedance 10 kΩ
Input Trim –6 dB to +6 dB
Max. input level +22 dBu
COMPONENTS
High-frequency driver Ultra-high resolution 1" dome tweeter
Low-frequency driver 6 ¾" diameter Kevlar diaphragm
AMPLIFIER OUTPUT POWER
Low-frequency range
RMS @ 0.1 % THD
(sine wave)
35 W @ 4 Ω
Peak power 50W @ 4 Ω
High-frequency range
RMS @ 0.1 % THD
(sine wave)
15 W @ 4 Ω
Peak power 25 W @ 4 Ω
CROSSOVER
Type Active
Crossover frequency 4.3KHZ
SYSTEM SPECIFICATION
Frequency response 50Hz to 20kHz
Sound pressure level max. 110dB SPL@1m(pair)
Low Frequency 0 dB @ 60 Hz
–2 dB @ 60 Hz
–4 dB @ 60 Hz
–6 dB @ 60 Hz
Room Compensation 0 dB @ 300 Hz
–2 dB @ 300 Hz
–4 dB @ 300 Hz
–6 dB @ 300 Hz
High Frequency +2 dB @ 8 kHz
0 dB @ 8 kHz
–2 dB @ 8 kHz
–4 dB @ 8 kHz
POWER SUPPLY
Voltage/Fuses
90 - 254 V~, 50/60 Hz T 1.6 A H 250 V
Power consumption
B1030A 100 W
Current consumption
100 - 120 V~, 50/60 Hz max. 1.0 A
220 - 230 V~, 50/60 Hz max. 0.5 A
Mains connection
B1030A Standard IEC connector
DIMENSIONS/WEIGHT
Dimensions (HxWxD) 288mm x 198mm x 280mm
Weight 5.5 kg
BEHRINGER is constantly striving to maintain the highest profes-
sional standards. As a result of these eff orts, modifi cations may be
made from time to time to existing products without prior notice.
Specifi cations and appearance may diff er from those listed or
illustrated.
B1030A
Studio Monitors