Vigo VG06049 - Manual (Page 13)

GUIDELINES FOR BASE INSTALLATION
SHOWER BASE
Routine Cleaning: Mild, non-abrasive cleaner specifically formulated for gelcoat and acrylic surfaces recommended. (Rinse surface thoroughly.)
Heavy Soap Deposits: Liquid ammonia household cleaner, applied full strength. (Rinse surface thoroughly.)
Stubborn Stains: Liquid household cleaner or hydrogen peroxide, applied full strength. Place a saturated clean rag directly on stain and let stand several hours.
(Rinse surface thoroughly.)
Hard Water Scales: Liquid scale remover or white vinegar, applied full strength. (Rinse surface thoroughly.)
Mold/Mildew: Liquid mildew remover or baking soda and water paste. Apply paste and allow to fizz several minutes. (Rinse surface thoroughly.)
CARE AND MAINTENANCE
13
TROUBLESHOOTING
PROBLEM POTENTIAL CAUSE CORRECTIVE ACTION
1 - After installation if the base flexes when stepped on
2 - Base does not drain
3 - Drain hole is in incorrect corner per desired location
1 - Not enough underlayment was used
2 - The base was not installed level
3 - Ordered incorrectly
1 - Contractor to remove and reinstall with proper amounts of
underlayment
2 - Check pitch with a level and reinstall accordingly
3 - Contact your Vigo retailer for methods of resolution
TOLL FREE: (866) 591 - 7792
E-Mail: [email protected]
www.vigoindustries.com