Blaupunkt Hamburg CD70 - Manual (Page 16)

16
As soon as a station of the selected type is
found, the device switches from the present
station, or out of CD, cassette tape, MiniDisc
or CD changer mode (depending on how your
radio is equipped) to the station with the se-
lected program type.
Activating PTY
To use the PTY function:
➮
Press the TUNE button,
>
, when the
radio is operating.
The radio function menu is shown on the dis-
play.
➮
Press the softkey,
4
, indicating “PTY”.
When PTY is switched on, the display briefly
shows the last program type that was select-
ed. “PTY” appears in the display.
To return to the basic radio menu:
➮
Press the TUNE button,
>
, or wait for
eight seconds. The settings are then
saved.
Deactivating PTY
➮
Press the TUNE button,
>
, when the
radio is operating.
The radio function menu is shown on the dis-
play. “PTY” appears in the display.
➮
Press the softkey,
4
, indicating “PTY”.
“PTY” disappears from the display.
To return to the basic radio menu:
➮
Press the TUNE button,
>
, or wait for
eight seconds. The settings are then
saved.
Selecting the program type and starting
the search
➮
Press the or button,
7
.
The current program type is shown on the
display.
To change to a different program type:
➮
Press the or button,
7
, until the
desired program type is displayed.
Or
➮
Select a saved program type by press-
ing one of the softkeys,
4
, indicating
“ST1” -”ST6".
The selected program type is briefly displayed.
In order to start the search:
➮
Press the or button,
7
.
The next receivable station with the selected
program type is tuned in.
Note:
If no station is found with the chosen program
type, a beep is heard and the display briefly
shows “NO PTY”. The tuner returns to the
most recently received station.
Storing program type on station buttons
➮
Select a program type with the or
button,
7
.
➮
To save a program type, hold down one
of the softkeys,
4
, indicating “ST1” to
“ST6”, for longer than one second.
The program type is saved at the chosen lo-
cation.
Optimising radio reception
Treble cut in the presence of interference
(HICUT)
The HICUT function improves the sound
when radio reception is poor. When interfer-
ence is being received, the treble is automat-
ically cut which also reduces the level of in-
terference.
Setting HICUT
➮
Press the MENU button,
8
.
➮
Press the or button,
7
, until “HI-
CUT” appears in the display.
➮
Press the or buttons,
7
, to adjust
the HICUT function.
“NO HICUT” means that the function is inac-
tive, while “HICUT 3” indicates the strongest
automatic reduction of treble and interference.
RADIO OPERATION