Telematrix SP300 User Manual
Page 12
12
Installing The Wall Power Adapter
(Optional Component)
This component is best used when wall
mounting the telephone. To install,
simply plug the power adapter into a
standard 120V AC power outlet. A
mounting hole is provided to secure
the power pack to the AC wall outlet.
Plug the AC power pack directly into
the wall outlet and then plug the coax-
ial connector into the receptacle
marked “POWER” located on the back
of the telephone.
ORDER SEPERATELY
120V AC POWER
POWE R
IMPORTANT!
The telephone will not function if the line cord connections are not correct. Be sure that
the telephone line cord connections are not reversed (“LINE”/”PHONE”). Attach the line
cords to the power adapter and the wall before connecting to the telephone. Spectrum
PLUS
TM
Line Cords are 6-Pin 6-Conductor Line cords (6P6C line cord) . Replacement Line
Cords must be same.
!
Power Outlet Configuration
The Spectrum PLUS
TM
telephone requires
external power from a standard 120V
outlet (60Hz). It is rated 9VAC, 300mA.