TapeTech 16TT90 Mud Head - 90 Degree Inside Corner User Manual
Mud heads, Operation and maintenance guide, Better – faster – every time
Operation and Maintenance Guide
1380 Beverage Drive, Suite W
Stone Mountain, GA 30083
1-800-426-6256 | 678-892-2323
Better – Faster – Every time
Updated 04 2012
© 2012 TapeTech Tool Co. All Rights Reserved
www.tapetech.com
Operation
The Mud Head is designed to place a consistently wide ribbon of joint
compound to each side of the internal or external corner for installation of
paper tape or corner bead.
Snap the Mud Head onto the corner applicator or MudRunner® and fill it with
joint compound. Start at one end of the corner and apply pressure to the corner
applicator or MudRunner™ to start the flow of compound while moving the tool
along the corner to the opposite end. Now apply the tape or corner bead.
Maintenance
Clean thoroughly with brush and water (or water hose) to remove all joint compound from the tool.
After the tool is clean, lightly oil with Ames® Bazooka® Oil or any light machine oil.
Mud Heads
Models: 16TT & 16TT90