beautypg.com

Installation, Installation of the lpg conversion kit – Regency Panorama P33 Small Gas Fireplace User Manual

Page 34

background image

34

Regency

®

P33-4 Zero Clearance Direct Vent Gas Fireplace

INSTALLATION

Each Kit contains one LPG
Conversion Kit and one DC
Sparker Kit.

LPG Conversion Kit Contains:
Qty. Part #

Description

1

904-163

Burner Orifi ce #54

1 904-434 Burner Orifi ce #56
(For use on P33-4 with Faceplate ONLY)

1

918-590

Decal "Converted to

LPG"

1

908-528

Red "LPG" label

1 904-529

5/32"

Allen

Key

1 910-037

LPG

Injector

DC Sparker Kit Contains:
Qty. Part #

Description

1

820-475

Bracket DC Sparker

1

820-476

Bracket DC Sparker

1

904-153

Washer #8 External Star

1

904-330

Nut 8-32 Hex

1

904-438

Plug Nylon 0.750 Hole,

Black

(for

H25

only)

1

904-531

Bushing Split Plastic

0.500

in.

1

904-543

Screw 8-32 x 3/4 Pan

Head

2

904-553

Screw #8 x 1/2 Type

"B",

Black

Oxide

1 910-073

Spark

Generator

Battery

Holder

1

910-074

Spark Generator

Switch

C/W

Wire

1

910-078

Battery Size AA

Energizer

En91

2

910-199

Clip Wire Holder

1

910-903

Wire Fan To Power Cord

Ground

30

in.

904-781

Velcro

Hook,

Black

904-782

Velcro

Hook,

Black

Remove the 2 screws, push Burner

Assembly to the left and lift out.

Installation of the LPG
Conversion Kit:

1)

Shut off the gas supply.

2)
a) Remove the louvers, bay door or

faceplate if installed.

b) Open the fl ush door and remove the

door.

c) Remove the logs, embers, and brick

panels (if used).

Pilot assembly is now accessible for

steps 4) to 9).

d) Remove the 2 screws holding the

Burner Assembly to the fi rebox base.
Push the Burner Assembly to the left
and lift out.

4)

Unscrew the pilot orifi ce with the Allen
key and replace with the LPG pilot orifi ce
in the kit and replace pilot cap.

5)

Remove burner orifi ce with a 1/2"
wrench and discard. Use another
wrench to hold on to the elbow behind

the orifi ce.

Burner Orifi ce

6)

Reinstall new burner orifi ce LPG
stamped #54 and tighten.

3) Undo clip and remove pilot cap to
expose pilot orifi ce.

Clip

Pilot Cap

Warning

Must install LPG Orifi ce #54 for use
with Flush, Louver, or Bay Door.

Must install LPG Orifi ce #56 for use
with Faceplate.

NOTE: See page 1 for H25 / H27 conversion instructions and page 7 for E33S / U32S conversion instructions.

CONVERSION KIT# 434-969 FROM NG TO LP

For P33-4 Using SIT 820 NOVA Gas Valve

THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER IF IN DOUBT DO NOT DO THIS CONVERSION !!