BUSH DPF801 - Manual (Page 9)

6
4 System Settings
Select[Setup] from the main menu, press the ENTER button or press the SETUP button in any other mode
to enter setup mode. Below illustration shows the screen of the setup menu. Use navigation buttons to
select decided item followed by ENTER button. Use button to select between options then press
ENTER to confirm. The following illustration shows the initial screen in the settings mode, and in the
following section
The adjustment operation for the SETUP menu is as follows:
4.1 Photo Setting
4.1.1 Interval Time
This option can be used to set the length of time for display of each image. There are seven options: 5
seconds, 10 seconds, 15 seconds, 30 seconds, one minute, three minutes,or off the function.
4.1.2 Transition Effect
This option is used to set the transition effect as images change.
4.1.3 Show Type
This option is used to set the photo fit to screen or keep its original size.
4.1.4 Slide Mode
This option is used to set the slide mode while photos showing. Include 3 options as :Normal, Motion
and Date & Time.
4.1.5 Browse
There are two kinds of "Photo" modes, one is the "Thumbnail" mode, and the other is the "File Manager"
mode.
Thumbnail mode:
Thumbnail Mode
Page:1/24
427x640 2006/02/24 Rotate Slide Show
To power on the photo frame, set the POWER switch to ON position.
The following operations are using remote control.
Interval Time
Transition Effect
Show Type
Slide Mode
Browse
Setup Menu Photo Setting
:Select :Confirm