Summit DL1KIT - Manual

WWW.MEDICALREFRIGERATORS.COM
ACCUCOLD DIVISION | FELIX STORCH, INC. 770 GARRISON AVENUE, BRONX, NY 10474 USA TEL 800-932-4267 FAX 718-842-3093
The USB Temperature Logger from Summit Accucold ® is designed to record refrigerator or freezer temperatures to any USB
flash drive for display and analysis on a PC. Using NIST traceable probes, the Temperature Logger measures and saves the
temperature readings in 15-minute intervals. When ready to see the results, just plug the flash drive into your PC or Mac and
transfer the data to Microsoft Excel, where you can graph, chart or print the data in whatever format you require. A reusable
2GB flash drive with 6 months of storage capacity is included with the Summit Accucold ® Temperature Logger.
InstructIon sheet
QuIckstart
1. Insert the supplied flash drive into your computer.
2. Go to My CoMputer and locate the drive labeled ACCuCold.
3. Launch the ACCuCold progrAM.
4. Select open drive to tell the program the location of the Accucold drive.
5. Select the Accucold drive from the drive list.
6. Once the drive is selected, click on the Set tiMe button
to save the date and time settings to the Accucold flash drive.
7. You will be instructed to insert the flash drive into the
Temperature Logger and hold the white button down for 10 seconds.
8. When the LED flashes a second time (after 10 seconds
has elapsed), the time will be set.
9. The Logger will automatically begin recording temperature
every 15 minutes.
Initial setup – setting the time:
ACCUCOLD PrOGrAM
You will need:
PC Or MAC ACCUCOLD FLASh DrIvE &
TEMPErATUrE LOGGEr
contInue to Product use and maIntenance