Summit SWC1535 - Manual (Page 5)

LOCATION OF PARTS
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE
 Remove the exterior and interior packing.
 Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
 Clean the interior surface with lukewarm water using a soft cloth.
 Install the handle on the door. (See page 8.)
INSTALLATION OF YOUR APPLIANCE
 The appliance is designed for built-in, recessed or free-standing installation.
 WARNING: Do not store or install the appliance outdoors.
 CAUTION
: This appliance is designed for storing and cooling wines. Do not store perishable food,
medicine or other medical products.
 Place your Wine Cellar on a floor that is strong enough to support it when it is fully loaded. To level the
unit, adjust the front leveling legs.
 For free-standing installation, leave 5 inches (127mm) of space around the back and sides of the unit
to allow proper air circulation to cool the compressor and condenser. Even for built-in installation, you
5