Summit SCM1800M2 - Manual (Page 18)

oven has been used.
This function is for the user to analyze the usage of the oven and the traffic flow at a particular
location where the oven is being used commercially.
SWITCH
The oven can use a single magnetron or double magnetrons to cook. In single magnetron mode,
you can save power, while with double magnetrons, you can use less time to cook. The default
setting for the oven is double magnetrons, but you can press SWITCH to change. Select it before
setting a cooking program.
ADJUST THE COOKING TIME
During cooking, you can press +/- to adjust the cooking time. Each press adjusts the cooking time
by 20 seconds. The maximum time you can set is 1H :39 seconds. For the preset programs, you
cannot adjust the cooking time by pressing +/-.
CHILD PROOF LOCK
In waiting mode, press and hold PROG for 5 seconds. This locks the oven.
To release Child Lock, press and hold PROG for 5 seconds, and the oven goes back to normal.
RETURN TO FACTORY SETTING
If you want the oven to return to the factory default setting, press the START key and plug in the
oven until “00：00” shows on the screen, then press the following keys one by one: “1”, “2”, “3”, “4”,
“5”, “6”, “7”, “8”, “9”, “0”, “POWER LEVEL”, “X2”, “PROG“, “SWITCH“, “+”, “-”, “STOP/RESET”,
“START”. The screen will show “0018”; open and close the door, then open it again. A beep will be
heard to signal that the oven is back to its factory setting.
17