Summit SCM1000SS - Manual (Page 11)

10
The user is free to reset the cooking program stored under each of the ten number keys anytime. In
order to set a cooking program, which may contain up to 3 stages of consecutive cooking periods with
different power levels, and to designate a number key for this program, see the example below:
To set medium power cooking for 8 min. and save it to number pad 5:
1. Touch PROG once.
2. Press number pad 5.
3. Press POWER LEVEL twice to select MED.
4. Touch number pads 8, 0, 0.
5. Press PROG to save.
You can set a two- or three-stage cooking program by repeating the steps 3-4 once or twice. When
finished, press STOP/RESET to return to waiting mode.
Note: If you want the oven to start immediately after touching any of the number keys instead of after
touching the START pad, press and hold down STOP/RESET for 5 sec until “P L” appears on the
display. Now you don’t need to press the START pad after selecting a cooking program by touching
any of the number keys.
H
OW TO USE THE
X2
PAD
More cooking programs can be stored under the number keys by using the X2 function.
In waiting mode, press X2, any of the number keys, and the START pad, you can recall a preset
cooking program as follows:
Number/Memory
Pads
1 2 3 4 5 6 7 8 9 0
Preset Cooking
Time
:20 :40 1:00 1:30 2:00 3:00 4:00 5:00 6:00 7:00
X2 function can only program one-stage cooking. After setting is completed, press STOP/RESET to
return to waiting mode. The oven will start after you touch X2, any of the number keys and then the
START pad.
For example, to use the X2 function, and save a program of full power and 3 minutes cooking to
number pad 8.
1. Touch PROG once.
2. Touch X2 pad once.
3. Press number pad 8.
4. Press POWER LEVEL once.
5. Touch number pads 3, 0, 0.
6. Press PROG to save.