Summit DW18 Quick Start - Manual (Page 2)

SALZ
TU
Z
SA LT
S
E
L
FUNCTION BUTTONS EN
ON/OFF BUTTON
Turn the dishwasher on with the On/Off button. When turning on,
the icon on the display module of the last used program will light up.
PROGRAM SELECTION BUTTON
Use the Program Selection button to select the desired program.
The icon of the corresponding program will light up.
Refer to “Table of Programme Data and Average Consumption
Values” to select a programme suitable for your dishes. Select the
desired programme with programme selection button.
HALF LOAD/TABLET DETERGENT BUTTON
Half Load/Tablet Detergent Button allows you to turn on and off the
Half Load and Tablet Detergent functions of your machine.
START/PAUSE/CANCEL BUTTON
Use this button to start the selected program. When the button is
pressed once, the light on the button will turn on.
Stop the program with the Start/Pause/Cancel button.
REMAING TIME INDICATOR/DELAY TIME INDICATOR
You can follow the remaining program duration from the time
indicator display.
TIME DELAY BUTTON
This option enables you to start the selected program with a delay
of 0,5 to 9,5 hours.
1. Delay time is adjusted by pressing the Time Delay button (press
several times).
2. After adjusting the delay time, press the Start/Pause/Cancel
button.
3. Close the door. At the end of the delay set, the program starts
automatically.
Notice :
During a wash program the Time Delay option does not function.
CANCELLATION OF A PROGRAM
To cancel a program while the dishwasher is running:
1. Open the door gently.
2. Press and hold Start/Pause/Cancel button for 3 seconds. The
indicator light will start flashing.
3. Close the door.
4. The dishwasher will drain the water inside the machine for 2
minutes. At the end of the cycle a beep will sound. You can choose
and start a new program.
WARNING
Depending on the stage of the program you have cancelled,
there may be detergent residue or rinse aid inside the machine
and on the dishes. Make sure the items in the dishwasher are
not used before washing properly. Ingestion or inhalation of
detergent or rinse aid may cause serious injury. Avoid contact
with skin and eyes and keep children and infirm persons away
from these materials.
PROGRAM CHANGE
To change the program selection while the dishwasher is running:
1. Open the door.
2. Press Start/Pause/Cancel and select a new program.
3. Press Start/Pause/Cancel again, to start.
If this indicator light comes on, you
need to refill rinse aid.
You can also tell whether rinse
aid must be refilled by looking at
the rinse aid dispenser. When the
visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the color is light, open the
dispenser and refill rinse aid.
Dark : Sufficient rinse aid
Light: Refill rinse aid
Visual indicator
Indicateur visuel
Sombre : il y a suffisamment de
produit de rinçage
Clair : rajoutez du produit de
rinçage
Oscuro :Enjuague
suficiente
Encendido :Rellenar
con enjuague
Indicador Visual
Reset.
3 sec.
Reset.
3 sec.
When this indicator light comes on,
you must refill special salt. Only
use special dishwasher salt in your
machine to soften the water.
The salt content can be read on
the container for the salt. When the
visual fill indicator is dark, there is
enough salt in the container.
When the color is light, open the
container and add dishwasher salt.
WARNING
Depending on the length of the terminated program detergent
and rinse aid may still be in the dispensers.
Ingestion or inhalation of detergent or rinse aid may cause
serious injury. Avoid contact with skin and eyes, and keep
children and infirm persons away from these materials.
8 RINSE AID LEVEL INDICATOR LED
3 SALT LEVEL INDICATOR LED
(MODEL DEPENDING)
CHANGING WARNING SOUND VOLUME
Press and hold Half Load / Tablet Detergent key for 5 seconds until
S:03 appears on the display. Every time you press the Half Load /
Tablet Detergent key, the warning sound level will change as - - Off,
S:01 Low, S:02 Medium, and S:03 High. After selecting the sound
volume, wait for 10 seconds to save it. Factory setting of your
machine is S:03.
Reset.
3 sec.
Reset. 3 sec.
1 On/Off button
2 Half Load indicator led
3 Salt level indicator led *
4 Start/Pause/Cancel indicator led
5 Start/Pause/Cancel button
6 Time Delay button
7 Time Delay indicator led
8 Rinse aid level indicator led
9 Remaining Time Indicator/Delay Time Indicator
10 Tablet Detergent indicator
11 Program Indicator
12 Half Load/Combi Tablet button
13 Program Selection button
(* Model depending)
17 9871 01 00-AA