Summit BIM24SS - Manual (Page 4)

3
• To prevent accidental injury, the cord should be secured behind the ice maker and not left exposed or
dangling.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not
use an extension cord with this appliance. However, if you must use an extension cord it is absolutely
necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding
type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
Connecting the Water Supply
• Not all the necessary hardware is provided for installation so it is necessary to hire a professional
licensed plumber to complete the installation.
• Connect tubing (supplied with unit) to the nearest cold water source. Connect sufficient tubing to the
unit to allow the appliance to be moved freely for cleaning and service. Also make sure that the tubing is
not pinched or damaged during transportation.
• Position unit to allow free airflow through the front grill (see sketch 1). Wipe out inside of unit and ice bin
with a damp cloth.
Reversing The Door Swing Of Your Ice Maker
This appliance has the capability of the door opening from either the left or right side. The unit is delivered to
you with the door opening from the left side. Should you desire to reverse the opening direction, please call
customer service for reversal instructions.
SKETCH 1

WARNING

I MPROPER WATER LINE CONNECTION MAY RESULT IN FLOODING .
Y OU MUST USE A LICENSED PLUMBER .
R EVIEW STATE AND LOCAL PLUMBING CODES BEFORE INSTALLATION .