Summit BIM24OS - Manual (Page 4)

3
• This ice maker requires a standard 115/120 volts AC, 60Hz electrical outlet with three-prong
ground. The appliance can resist temporary voltage fluctuations from -15 to +10%.
• To prevent accidental injury, the cord should be secured behind the ice maker and not left exposed
or dangling.
• Many outdoor outlets are controlled by wall switches. Turning power off and then on again may
cause the GFCI switch to trip. A GFCI (ground fault circuit interrupter) is built into every line cord.
Do not defeat or bypass this important safety feature. The line cord supplied with this appliance is
specifically designed for outdoor use. In the event the cord becomes damaged, use only a
factory-supplied replacement cord with a GFCI. You may purchase these cords from either our
sales or service departments at 1-718-893-3900 (Sales) or 1-800-932-4267 (Service). They can
also be purchased online at www.summitappliance.com/support.
Connecting the Water Supply
• Not all the necessary hardware is provided for installation so you should hire a professional
licensed plumber to complete the installation.
• Connect tubing (supplied with unit) to the nearest cold water source. Connect sufficient tubing to the
unit to allow the appliance to be moved freely for cleaning and service. Also make sure that the
tubing is not pinched or damaged during transportation.
• Position the unit to allow free airflow through the front of the unit. Wipe out inside of unit and ice bin
with a damp cloth.

WARNING

I MPROPER WATER LINE CONNECTION MAY RESULT IN FLOODING .
Y OU MUST USE A LICENSED PLUMBER .
R EVIEW STATE AND LOCAL PLUMBING CODES BEFORE INSTALLATION .