Square Perfect 815 SP1 Light Kit - Manual (Page 7)

1. Obtain the softbox with socket (A) and
unfold [figure 1]. Ensure that the inner rods
are secure in the corner pockets before
proceeding [figure 2].
2. Next, grasp the center ring [figure 3]and
push towards the socket until it locks in
place. [figure 4]
Boomstand and Softbox Assembly
7
Copyright 2013 DTX International
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
3. Screw the 65 Watt lightbulb (E) into the
socket [figure 5]. Take care not to over-
tighten the bulb.
4. Stretch the
softbox diffuser (C)
(rectangular white cover) over
the front of the softbox. The
cover should fit on the outer
edge of the box without a
problem. [See figures 6 & 7].
Figure 6
Figure 7