Safety precautions, Assembly instructions – Square Perfect 2804 SP90 PortaPower Light Kit User Manual

Page 4

SAFETY PRECAUTIONS:

SP90 PHOTO STUDIO CONTINUOUS

LIGHTING PHOTOGRAPHY STAND LIGHT

www.squareperfect.com

Insert bulb into light holder as
shown and screw bulb until it fits
snug into the socket.

Attach light holder to tripod/light
stand as shown. Be sure to tight-
en screw on back of light holder
for stability.

Insert umbrella pole into hole in
light holder and tighten screw on
side of light holder to keep um-
brella stable.

ASSEMBLY INSTRUCTIONS:

Become thoroughly familiar with this product before use. Run
through at least one practice assembly and breakdown before
you schedule a shoot.
Never leave the lighting unsupervised when in use. Keep children
or incompetent person away from lighting equipment.
If the power cords show signs of wear or damage, they should be
replaced or repaired by a qualified electrician before use.
Wait until bulbs are completely cool before touching or removing
them.

Never use in a wet environment.
Never move the appliance by pulling the cord. Make sure the cords
do not come in contact with bulbs. Do not wind the cord around
the appliance.
Place stands/tripods on flat surface to prevent toppling.
Do not touch the metal parts near the bulbs while in use, these
parts may become very hot.
Do not let umbrella touch light bulb when in use. Light bulb will get
hot and can ruin the umbrella or start a fire.

l

l