Bosch Electric Range with Magnetic Control Knob and European Convection - Manual (Page 16)

Getting Started
English 14
4. Press START. BAKE will show in display and temperature will flash.
5. Turn knob to set oven temperature.
6. Turn oven light on if desired (press LIGHT).
Note: The light cannot be changed after this point. It will stay on or off, as
selected, during the entire Sabbath mode.
7. Press START. Oven starts after 5 seconds.
The oven operates for 73 hours and then turns off automatically.
Setting the Sabbath Feature for both the Warming Drawer and the Oven.
Note: warming drawer does not operate with the Sabbath feature unless the fea-
ture is also activated in the oven.
1. Turn the warming drawer on to the desired heat setting. See “Turning on the
Warming Drawer” on page 21.
2. Verify that the oven is turned off.
3. Access SELECT FUNCTIONS Menu.
4. Turn knob clockwise until SABBATH OPTION appears.
5. Press START. BAKE will show in display and temperature will flash.
6. Turn knob to set oven temperature.
7. Turn oven light on if desired (press LIGHT).
Note: The light cannot be changed after this point. It will stay on or off, as
selected, during the entire Sabbath mode.
8. Press START. Oven starts after 5 seconds. Sabbath Feature is activated for
both the warming drawer and the oven.
The oven and warming drawer operates for 73 hours and then turn off automati-
cally.
Setting the Sabbath Feature for the Warming Drawer Only
The warming drawer does not operate with the Sabbath feature unless the feature
is also activated in the oven. See “Setting the Sabbath Feature for both the Warm-
ing Drawer and the Oven.” on page 14.
Change the Time For-
mat
The clock can be set to a 12 hour or 24 hour format. The default for clock format is
12 hour.
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until TIME FORMAT is displayed.
3. Press Start.
4. Turn knob to select 12 hour or 24 hour format.
5. Press Start to accept new selection.
Turn Automatic Convec-
tion Conversion ON or
OFF
This feature automatically converts package or recipe temperatures for use with
the convection bake mode. The default setting is “on”.
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until AUTO CONVECT BAKE is displayed.
3. Press Start.
4. Turn knob to select ON or OFF.
5. Press Start to accept new selection.
Before Using the Appliance for the First Time
0.0