Braun BP2550 - Manual (Page 8)

8
Please note:
15 seconds after switching on the appliance, the
measuring process will start automatically, even if the
appropriate measuring position has not been reached.
If at any time, you want to discontinue the measurement,
press the «I/O» button.
Turning off the product
Press the I/0 button to turn the product off. Otherwise the
product will turn off automatically after 2 minutes.
Memory function
Your blood pressure monitor can store the readings of
60 measurements. Storing is done automatically without
having to press the memory button after a measurement.
The memory cannot be cleared. Once the memory is full,
the oldest values will be overwritten.
Recalling stored readings
To recall stored readings, first turn the product off, then
press the memory button («mem») (B).
The latest reading will be displayed. The lower display
line shows successively date, time and pulse of the
respective measurement.
The position sensor symbol ( ) shows that the
respective measurement was taken at heart level.
Repeatedly pressing the memory button will call up one
by one all stored readings (with date and time).
6063010_BP2550_S4-58 Seite 8 Dienstag, 8. April 2003 2:17 14